Quantcast
Channel: Hamachi Discussions topics
Viewing all 3259 articles
Browse latest View live

RDS Connect in Windows Server 2012 R2 Fail Every Time

$
0
0

About few months the Hamachi installed on Windows Server 2012 R2 with Remote Desktop Services (RDS) configured with a Hub and Spoke Network (server as Hub) fails to connect clients every time, the clients fill the username and password in their machines and while connecting freezes the connection with description: "estimating connection quality" and fail to connect.

 

To solve this I need to reinstall de Hamachi on the server every time and magically solves the problem and the clients connect without any problems. But after a moment (sometimes hours, sometimes 1-2 days) the problem come again, and again.

 

Anyone can help me to solve this problem? In few months ago we don't have any problems and Hamachi worked a well for a long time. Thanks.


IS IT POSSIBLE: Mapping a Drive Letter?

$
0
0

I've seen one post in the Hamachi community (from discochesney and woogherthat discusses adding the network HUB IP address as the primary DNS server - but it's not really going to help if the IP address of the HUB changes each time that HUB machine has to reboot and reloads Hamachi services.

 

Has anyone been able to come up with an automated solution to get drives mapped using Hamachi using a batch file or other means? 

 

Appreciate any response...

 

Russ Foszcz

My Hamachi is Using APIPA (169.*.*.* network)

$
0
0

Worked for years on my Windows 7 Hyper-V VM.  Tried to move to Windows 10 VM had other problems.  Now on a freshly built and patched Windows 10 physical box I'm able to get connected with clients but it is using APIPA network which starts with 169 instead of the actual network I am connected to.  Anyone see this before?  Talked to support for hours and they told me to expect a call back from second level and never got a call.

Hijacked account?

$
0
0

Hi,

My pc was hacked this morning and my Bittrex account was cleaned out. I'm concerned my Hamachi may be compromised as well. Could someone please look over my log? I'm trying to figure out how they got in. I was logged in to my Bittrex at the time. They were certainly roaming around my pc as they deleted 2 confirmations emails (without setting a rule) and I'm guessing forwarded them? These were to confirm the withdraw. They came at 7:30 Am. The engine log started up at  5:46 am and ran pretty active closing at 9:57. This caught my attention ..."07/04 06:34:20.383 [9104] tun: peer 227-701-426 missed a keep-alive on 00000256851BC870, zombi 1"  and several around  it. I can't figure out how to attach lt so I'add it soon.

Relayed tunnel

$
0
0

Recently , i've been having an issue where i am a relayed tunnel to everybody else .

Tunnel: OK

Local results:
Adapter configuration: OK
Traffic test: OK
Peer results: [227-943-900]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings

This is what i get for the diagnosis summary . I've tried disabling my firewall and trying out other methods that has helped others , yet i am still a relayed tunnel . What would be the problem?

2 instances of Hamachi simultaneously

$
0
0

Hello.

I have 1 home pc with Windows 10 installed.

I bought Ibik Aster to make a multiseat environment. So I and my spouse can use one pc simultaneously.  We wanted to play lan game through hamachi, but when we start Hamachi simultaneously it uses one (e.g. mine login, becuase first when I installed Hamachi and started it with my credentials) login. 

My question is - Is it possible to run 2 instances of hamachi simultaneously with different logins?

Thanks

Hamachi Network Adapter Gone (yellow triangle tunnel adapter error)

$
0
0

When I try to use Hamachi I am greeted with the yellow triangle of death. This is the result of the failed network adapter I believe. The problem is mine is gone and is not visible in device manager. When I try to manually install it using the add hardware wizard the download fails. I have tried reinstalling and rebooting several times, does anyone have a solution?

How to buy Hamachi Multi-Network?

$
0
0

I want to buy Hamachi Multi-Network, but when I choose this option, log in (fresh account or existing account - doesnt matter) and when it comes to pay - the only option available is Standard. Logmein support knows NOTHING about it. Hope somebody here knows the problem.


Failed to connect to hamachi servers since 2018..

$
0
0

Hello everyone,Hello hamachi community !

Today,Or maybe since a year, In egypt, me and my neighbours and friends who use hamachi cannot use it Since 2018, Or since VoIP is disabled here ( i think ? ) 

 

And i am in a big need of using hamachi, I know someone will suggest some posts , But i have tried everything related to the problem (using my mind and some times i got bullied into noob tricks lol)

And i know someone will suggest using VPN , Which might -sometimes- work , But i don't want to use VPN because it makes the ping really BAD ...

 

So please can anyone tell me how to fix that ? Because i'm tired of having 0.0.0.0 IP on my hamachi and my friend's hamachi ...                     -Thanks in advance !

No authentication code sent to gmail

$
0
0

I have introduced one of my friends to Hamachi,I told him everything,the instructions,but something was not right.When he already logged in to his account we thought everything was done,but when he tried joining my network,apparently he had to log in AGAIN,but this time,it was different.I ended up having to log him in from the site,and everything was working smoothly,but wait,he had to recieve a 6 digit code through his e-mail,and nothing was sent,we even tried changing the password,but wait,the e-mail didn't send,so now he can't log in,therefore hamachi is unusable.I don't know how this slipped through,but looks like it isn't solved yet AND Yes! I did check the spam AND the junk!

File transfer speeds are slow

$
0
0

Hello, I have a device connected to Hamachi as a mobile client over PPTP. I can see it as a relayed tunnel in my Hamachi app. I can ping it and connect to it with my SFTP client. Unfortunately, transfer speeds over Hamachi are very slow. I only get about 120KB/s upload to the device. I get much faster transfer speeds with a direct connection over the internet.

 

Is there any way to speed up a PPTP mobile device connection in Hamachi?

How to know hamachi status from android

$
0
0
Hi if someone want to know hamachi status from own raspberry pi is easy thath s enough write. Sudo hamachi and you get the status, but how can i do the same thing with android device ??? Android is not as linux system. How can i get the same result of. Sudo hamachi ??


Kind regards

Access internal website from Hamachi VPN on mobile

$
0
0

Hi,

 

I've been successful in connecting my mobile to my Hamachi VPN and can connect to my server using a remote desktop connection application.  I'm running an internal website on the server which I would like to access over the VPN from my phone but have no idea where to start. 

 

The website I'm trying to reach is running as live.appone.int on the server.   Using the equivalent of a host file on an android phone is not possible as I cannot root my phone.

 

Any help/suggestions would be greatly received.

 

Thanks

Help me

$
0
0

O meu Hamachi está com problema de encapsulamento e não consigo resolver. Se puderem me ajudar, ficarei muito feliz.

How start Hamachi before Windows 10 login

$
0
0

Hello to all,

as I wrote I need to connect my desktop PC (Windows 10 Professional) using hamachi. My problem is that the Hamachi service doesn't start until someboby do the login on Windows PC.

Is there any solution to enable Hamachi Vpn before Windows login screen in order to give me the possibility to logon by remote?

Many thanks in advance!

Jacobbe


Network Issue with Samsung PC Tablets Running Late Windows

$
0
0

I have a couple of Samsung PC Tablets running Windows 10. They are having a peculiar issue where their internet connection will be lost when Hamachi is installed. Essentially, the tablet tries to connect to the Internet by using the Hamachi router which results in no internet access. The only fix that I have been able to successfully execute is removing Hamachi from the machine altogether. I have attempted to search for information on this issue multiple times. I have yet to find a solution. Has anyone had this issue and been able to successfully alleviate the problem? What specifically is the problem when this happens? Thanks in advance for any help.

Inbound traffic blocked, firewall is disabled

$
0
0

Is there a clean way to allow inbound traffic for hamachi on windows 10 ? I mean the fix which consist into unchecking hamachi in windows firewall settings let me with the persistent message "Windows Firewall is disabled". Can we not just add a inbound rule ?

Relayed Tunnel

$
0
0

Using the diagnostics tool, it shows me that local is fine but for peer, the inbound connection is blocked. It also shows "relayed tunnel".

 

I have tried adding hamachi-2 to the firewall exception. I have added hamachi-2 tunneling to the inbound. I have unchecked hamachi from the protected network connections in the hamachi public profile. I have gone into the hamachi advanced settings and tweaked the settings as suggested by some videos.

 

The weird thing is while I was over at my friend's place while connected to their router, everything worked fine. It only doesn't work while I'm connected to my router. Also, someone else is connected to a different router and is able to connect just fine.

 

I am able to ping my friend and I get a response but it still shows "relayed tunnel".

 

Edit: So the problem seems to be router related. The same problem is happening on a different computer on the same router.

Inconsistent IP address returned on Ping

$
0
0

Hi all,

A mysterious issue has just popped up and I can't figure it out.  I have been using a very simple Hamachi VPN for months. Just two computers, connected over the internet. WORK-PC is on the company network, my laptop is at home. Until a couple of days ago, this worked fine.  If I pinged WORK-PC from home, it would resolve to the Hamachi IP (25.82.xxx.xxx) .  If I pinged WORK-PC when connected to the office Wifi, it would resolve to WORK-PC's local IP on the office network (192.168.1.XX).  My home network uses 192.168.0.X.

 

Now, something weird is happening at home.  After starting the PC or restarting Hamachi, the first time I ping WORK-PC, it resolves to the Hamachi IP (25.82.xxx.xxx) and WORK-PC responds.  If I then ping WORK-PC again only a moment later, it resolves to WORK-PC's local IP address on the work network and cannot be reached.  So I have no communicate WORK-PC at all, unless I edit my hosts file or similar.

 

Here is the ping output...

 

Pinging WORK-PC [25.82.xxx.xxx] with 32 bytes of data:
Reply from 25.82.xxx.xxx: bytes=32 time=22ms TTL=128
...

Ping statistics for 25.82.xxx.xxx:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 20ms, Maximum = 47ms, Average = 27ms

 

C:\Users\xxxx>ping WORK-PC

Pinging WORK-PC [192.168.1.XX] with 32 bytes of data:
Request timed out....

Ping statistics for 192.168.1.XX:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)

 

Has anyone got any ideas how to resolve this?  I'm completely stumped!

 

Thank you!

M

Hamachi deshabilitado

$
0
0

Every time I diagnose everything is fine but the only thing that insides me to play with my friends is this error


Found adapters:
[Hamachi] - Disabled

 

Viewing all 3259 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>