Hi I have a problem with hamachi, I have been using it for Years and recently changed from a free to standered subscription. Just as I have done this my friends can no longer log into my minecraft world (using hamachi for gaming purposes) They were playing fine 10 mins ago when it was free but now no one can join now its standered subscription it dosent work. Is this because hamachi has a peroid where it dosent work after a subscription and takes time to get the server ready or is there another problem? Any help is appreciated!
↧
Hamachi is no longer working
↧
Transmitted encapsulation
Oi, eu tenho usado hamachi por 5 anos e nunca passei por nada parecido, houve um erro que não consigo resolver. Foto :
Meu amigo não pode entrar em nenhum jogo que depende do host e gostaria de ajuda
↧
↧
Hamchi gateway configuration
Hi everybody,
I have the following setup:
- raspberry pi with hamachi installed and configured as gateway
- 4G dongle with usb interface using the following subnet 192.168.0.0/24
- DHCP server - installed on the same machine with the following subnet 192.168.1.0/24
The Hamachi is starting well but I can only see the 192.168.0.0/24 subnet when I'm connected from another machine using hamachi client. How can I add the 192.168.1.0/24 ? I tried in command line something like: hamachi gw-config NETWORK-ID add 192.168.1.0/24, I receive OK but I still can't see any remote devices from 192.168.1.0/24.
Also the ifconfig commands shows me the following interfaces:
eth0 - 192.168.1.0/24
usb0 - 192.168.0.0/24
ham0 - some ipv4 address
ham1 - ipv6 address
ham-br0 - a brdige between ham1 and usb0
Can I configure the hamachi to bridge the eth0 instead? Why the bridge is between ham1 and usb0 instead of ham0 and usb0 even I try to set hamachi to use ipv4 (hamachi set-ip-address ipv4) ? I see you have a big lack of documentation about gateway configuration...
Regrads,
Andrei
↧
Hamachi on Synology NAS
Hello, I have a Synology DS918+ NAS running DSM 6.2.2-24922, and I would like to connect it to my Hamachi VPN.
I have connected to the NAS with SSH, and I am trying to follow the Linux (Ubuntu) installation instructions on page 14 of the Hamachi User Guide. I get the following error when I try to install the package:
sudo dpkg -i logmein-hamachi_2.1.0.198-1_amd64.deb
Authenticating logmein-hamachi_2.1.0.198-1_amd64.deb ...
debsig: logmein-hamachi_2.1.0.198-1_amd64.deb does not appear to be a deb format package
dpkg: error processing logmein-hamachi_2.1.0.198-1_amd64.deb (--install):
verification on package logmein-hamachi_2.1.0.198-1_amd64.deb failed!
Errors were encountered while processing:
logmein-hamachi_2.1.0.198-1_amd64.deb
Can someone help me with this please?
↧
No options to do anything when I open hamachi and when I turn it on
http://prntscr.com/o5cl18
Macbook air, not sure what to do.
Uninstalled an reinstalled four times, reset my laptop mutiple times.
↧
↧
Monster hunter Portable HD 3rd
I want to find community to play online MH3rd
↧
Windows Firewall
Hello,
I recently made a clean installation of Windows to another computer, yet I am not able to recieve incomming connections on Hamachi. However, if I disable Windows Firewall, it works perfectly.
I have added Windows Firewall rules that are exactly the same as two other computers I have setup on the same Hamachi network (allowing hamachi-2-ui.exe, hamachi-2.exe and lMIGuardianSvc.exe on both TCP and UDP(all programs in the x(86)/LogMeIn Hamachi and x64 directory)).
I have also tried https://help.logmein.com/articles/en_US/FAQ/Resolving-Hamachi-Request-Timed-Out and it does work, but Windows Firewall goes red across the board, with a notification prompting you to undo that change. Also what blows my mind is this was not necessary on the other two computers. So I think that is more of a bandaid fix than a real solution.
Am I missing some other install location or some other new thing only implemented on new installs of windows?
↧
Login Hamachi is not working after Subscription
Hello Madam/Sir,
Last month, we subscribed Hamachi for 1 year. but from last 15 days it deactivated.
Login ID : mzzz@yahoo.com
Network : IITM Pune ( 32 clients
Please find enclosed attachment of Invoice for your Reference.
Please do the Needful ASAP, as we are facing many issues.
Regards,
Vikram Kadam.
↧
[Windows 10 x64] Ping request timed out
Hello, yes it's another "Ping request timed out" issue, I've seen many around here and yet none solved my issue.
I'm trying to make a LAN party on a game to play with my brother and this just isn't working, we are connected to the same network but I assume AP Isolation is enabled or something like that so we can't play LAN just by being on the same network, I could change that if I had access to the router configurations and it's manual but I dont so I was trying to use Hamachi as an alternative but Hamachi also can't ping the other computer, it's happening to both of us, neither my computer pings his computer neither does his ping mine, it keeps saying 'Timed Out'.
I wonder if this has anything to do with the service, I noticed everytime I try to execute Hamachi it starts a diagnose process in which it tells me the service is stoped, to fix this I did what I found on google, I typed 'services' on the start menu, opened the services thing, searched for the Hamachi one and set it to 'Automatic' and start it, from that point forward it's supposed to work fine but it always fails so I always have to open the services and start the Hamachi service manually.
Another fix I found for this was to change the metrics of Hamachi's IPv4, to do so I usually go to Control Panel > Networks and Whatever > Adapter Settings or something like that (sorry I don't remember the names and I'm not English so my Windows is set to my language), then I right click Hamachi adapter and click properties then I click on the one that says 'Protocol IP Version 4 (TCP/IP)' and click on 'Properties' (from the window that is shown to me, everything is set to automatic, gateways, IPs, DNS and whatever) then I go to 'Advanced' there are two options there, the 'Gateway' where it has the 25.0.0.1, I had it set for a value that I don't remember but I guess 275 or anything like that, and below that there's the automatic metric option which I ticked off because I followed a guide to fix Hamachi before telling me to tick it off and put a 1 in there (It was set to 9000).
I also saw a different fix here where a guy replied saying that it could be due to multiple gateways so I had to open the command prompt and type 'route print' and if I had more than one 0.0.0.0 adress (using the Hamachi gateway to be more precise) then that was the problem, and I did, so I followed the steps, went back to the adapter settings again,ticked the automatic metrics on and deleted the default gateway in there and still nothing, ticked the automatic metrics off again, set the metrics to 9000 and still nothing, the thing I notice is that now the Hamachi on route print seems to be using a different gateway or whatever because I dont have two 0.0.0.0 anymore but there is a 25.0.0.0 now, however the metrics keep at 9256 even though I set it to 9000, when I had it set to 1, it would show 257 or 275 or whatever and when I had it at 9000 it would show 18000 so I'm thinking this might be the issue.
I must also remember you I did this process to both computers each step simultaneously and trying to ping it from his computer and always getting a Timed Out now on mine it is receiving but I still can't play with him, I tried creating the LAN server from my computer, I tried from his and still nothin.
Both our computers are HP Pavillion but his is a laptop while mine is a desktop, running Windows 10 64bits, we do have proper internet connection and we have actually done this in the past with success but now it doesn't work anymore and yes we did it with same computers, we didn't preform any changes to Hamachi, I did allow Hamachi and the game through the firewall for both private and public and then changed it to only private, I did try with different a Wi-Fi because here at home we have 3 Wi-Fi's.
Now I'm able to ping my brother but he can't ping me. On Hamachi everything looks fine, he is "green" to me (the little circle on the side of his name), I also am "green" to him, we ARE on the same network and we can chat through Hamachi, when I diagnose him eveything is okay, just the ping isn't going well and I can ping him now but he can't ping me.
Thank you.
↧
↧
Direct Tunneling and Adapter wont install
Hey, I have a problem with hamachi.
As it says in the title, Direct Tunneling and Adapter of Hamachi wont install.
Nothing happend.
Any help please?
↧
Network Password
Hi,
How i can check the password for the network i joined?
↧
Keep Android phone connected to hamachi more than 10 min
Hello,
I have try to connect my phone with Hamachi and it's worked very well. But a problem is happened. My phone disconnect from the vpn after 10 min aprox.
How can i keep the connexion permanently ?
Thanks for your help and sorry for my english ^^
↧
RDS Connect in Windows Server 2012 R2 Fail Every Time
About few months the Hamachi installed on Windows Server 2012 R2 with Remote Desktop Services (RDS) configured with a Hub and Spoke Network (server as Hub) fails to connect clients every time, the clients fill the username and password in their machines and while connecting freezes the connection with description: "estimating connection quality" and fail to connect.
To solve this I need to reinstall de Hamachi on the server every time and magically solves the problem and the clients connect without any problems. But after a moment (sometimes hours, sometimes 1-2 days) the problem come again, and again.
Anyone can help me to solve this problem? In few months ago we don't have any problems and Hamachi worked a well for a long time. Thanks.
↧
↧
h
h
↧
IS IT POSSIBLE: Mapping a Drive Letter?
I've seen one post in the Hamachi community (from discochesney and woogher) that discusses adding the network HUB IP address as the primary DNS server - but it's not really going to help if the IP address of the HUB changes each time that HUB machine has to reboot and reloads Hamachi services.
Has anyone been able to come up with an automated solution to get drives mapped using Hamachi using a batch file or other means?
Appreciate any response...
Russ Foszcz
↧
My Hamachi is Using APIPA (169.*.*.* network)
Worked for years on my Windows 7 Hyper-V VM. Tried to move to Windows 10 VM had other problems. Now on a freshly built and patched Windows 10 physical box I'm able to get connected with clients but it is using APIPA network which starts with 169 instead of the actual network I am connected to. Anyone see this before? Talked to support for hours and they told me to expect a call back from second level and never got a call.
↧
final fantasy type 0 ppsspp
Hola soy nuevo y quisiera saber si hay alguien que juegue final fantas tipe 0 multi jugador para unirme a sus partidas
↧
↧
final fantasy type 0 ppsspp
Hola soy nuevo y quisiera saber si hay alguien que juegue final fantasy tipe 0 multi jugador para unirme a sus partidas
↧
Hijacked account?
Hi,
My pc was hacked this morning and my Bittrex account was cleaned out. I'm concerned my Hamachi may be compromised as well. Could someone please look over my log? I'm trying to figure out how they got in. I was logged in to my Bittrex at the time. They were certainly roaming around my pc as they deleted 2 confirmations emails (without setting a rule) and I'm guessing forwarded them? These were to confirm the withdraw. They came at 7:30 Am. The engine log started up at 5:46 am and ran pretty active closing at 9:57. This caught my attention ..."07/04 06:34:20.383 [9104] tun: peer 227-701-426 missed a keep-alive on 00000256851BC870, zombi 1" and several around it. I can't figure out how to attach lt so I'add it soon.
↧
Relayed tunnel
Recently , i've been having an issue where i am a relayed tunnel to everybody else .
Tunnel: OK
Local results:
Adapter configuration: OK
Traffic test: OK
Peer results: [227-943-900]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings
This is what i get for the diagnosis summary . I've tried disabling my firewall and trying out other methods that has helped others , yet i am still a relayed tunnel . What would be the problem?
↧