I have a member connecting to 2 separate organizations (2 separate Hamachi networks) which each house a server acting as a Gateway. Both organizations use 192.168.1.x subnet. How can my member route to both?
I.E. 192.168.1.123 goes to Org1 192.168.1.123 or Org2 192.168.1.123 ??
I was trying to connect to my friend's farm (lan server) in Stardew Valley. Everything is okay direct tunnel status and ping shows 30-40ms.
But when attempting a connection in the game, ping shows request timed out, Discord shows 100% packet loss and chrome gives me "No internet connection". Game fails to connect and internet is back. Sometimes game connects and everything is okay but most of the time the problem occurs.
I have Hamachi client(Ubuntu) which is already attached to account. I need to detach it, but from client - I do not have access to the account which it is attached to. I searched a lot and I could not find command/way how to do it. I expected that since there is
hamachi attach xxx@xxx.com
there should be also
hamachi detach
command, but there isn't. Any ideas how to detach by client from the account through the client itself?
My hamachi says all ok when i diagnose but i still see the relayed tunnel blue dot and can't connect to my friend, he can connect to others and tried these solutions:
- Reinstalled x100 times
- Tried the UDP and TCP ports
- Restarted Router
- Disabled all possible firewalls,antiviruses
- Unchecked hamachi on protected firewall rules
- Created Firewall Rules to allow hamachi
- Tried a new network
- Tested on other PC
I have no idea why my Tunnels see everyone as offline but they appear online and I can connect to thier servers using hamachi, they can ping me and I can ping them but for some reason they can't connect to me. I have tried litterally everything, reinstalling, allowing through firewall, restarting my PC, updating hamachi network adapters, uninstalling and installing adpaters, added hamachi through firewall and removed it from my firewall but for some reason Tunnels still appear as offline when I use the Hamachi self diagnostic tool.
Test name: Tunnels Result: [YELLOW] -> (Problems found)
Details:
Peer details:
LINUS-PC (Offline)
DINIVI-4 (Offline)
Elliotes (Offline)
DESKTOP-UR2176B (Offline)
Those are not the ones im trying to connect to since they are offline but those are apparently casuing a problem? for the hamachi diagnostic tool
I have looked at posts through 2013 till today and still no solution. I'm on Win 10
We are new user to LogMeIn Hamachi. We have a Windows 7 and a Windows 10 client that has a mapped drive to the host server. If the clients reboot, after domain login, the mapped drive does not reconnect on its own, likely because the VPN has not reconnected first. We have the mapped drive set to reconnect after login. What is the best way to resolve this?
I also checked that my credit card already had payed.
However in my account, i can not make standard network
the only option is Free(up to 5 members) - never expires
I have already subscribed to standard hamachi products, but I still don't understand the mechanism, can I get an explanation? thank you.
Happy Morning
Appreciate if any one can help out to solve the following issue:
When i connect from my home to office network via Cisco VPN, i am able to access the all application and file server which are in different vlans.
but when i connect from my home to office network via Hamachi, i am not able to access application in a particular vlan series (i mean for example hamachi is installted in vlan 170.20.80.13 PC and i cant access application which are in vlan 70 series vlan .ex 170.20.70.8, at the same time i can access vlan series 170.20.130.10).
Regards
I have a question. What to do if my computer is connected via a wired connection and I can not connect with a friend to my server. I had a laptop it worked over wifi, everything was fine. I have a computer and no Wi-Fi module. And it works on a wired connection. What to do???
Hello there.
Cant use phone nomber ( 61-2-8199-8929 )that showed at https://www.logmein.com/ru/support/contact-us?_ga=2.163623615.1455805520.1545239109-665718817.1545239109
What phone nomber i shuld use to call from Russian Federation?
I need billing support for my Hamachi account.
No connection to the Internet when used, I need the Internet to be connected and the applications recognize the network as local, the 'send all traffic over VPN' parameter is not important. If set Forwarding Route 25.0.0.0/8, applications do not recognize the network as local
I've had a network configured for a customer for the past six months or so. Its a gateway network with the primary gateway PC configured for an IP address of 10.0.0.110 on the local network. When connected via Hamachi the IP address has always stayed 10.0.0.110 on the gateway network as well, but over this past weekend I found that Hamachi was reporting the IP address as 10.0.0.130, while the actualy NIC IP was still 10.0.0.110. I did a little troubleshooting and ended up removing and reinstalling Hamachi several times and each time the Hamachi IP changes by one number so that now its at 10.0.0.136. Any clue as to why this is happening? The customers system relies very much on this address staying static and changes have thrown the whole system into a tailspin. I still dont know why the address changed in the first place.
Thanks for any help.
hamachi client needs to be reinstalled and these are details
File not found: hamachi.cat
File not found: hamachi.sys
File not found: hamdrv.cat
File not found: hamdrv.sys
Every time I reinstall the program it installs it without the files. Can someone help?
Summary report
-----------------------
Test name: Peer Result: [RED] -> Problems found
Details:
Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results: [228-617-901]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings
---------------------------------------------
Tunnel:
VPN domain's tap device is down
Hi,
I am new to Hamachi LogmeIn. I installed on two computers that are not on the same LAN. I created a new network on the web portal, chose Mesh. Then I can connect both to it. Both can ping each other with a 25.* IP address.
Problem:
I am running a server app on one of the computers that is listening for TCP/IP traffic on port 10000. The second computer just cannot connect. I disabled firewalls, etc. Seems like the tunnel does not allow this port? Is there a setting somehwere?
Thanks,
Andy
My Hamachi is giving problem, when I try to login, it gives me this problem: this operation could not be completed you may have started a new session in another tab or window. Please try again.
Help!
When will the hamachi on the mobile android VPN IPsec work? It does not work to report unattached. Sometimes it worked, but there is no reliance on the hamachi society. And the second PPTP mode somehow goes but it's worse. Does anyone have a solution to it?
Thank you
When I create or enter a network I click on enter or create nothing happens, nothing stays, nothing happens after 10 or 20 seconds, I try several times and nothing I can not create or enter networks because of that some solution?
Hello Hamachi Community,
* I am a new user.
* We are trying to play arma3 on a LAN.
* I researched the above area in these discussions and found:
I recently had the same error message "VPN domain's tap device is down" following a Windows 10 update, after using Hamachi for years. Tried uninstalling and reinstalling Hamachi, problem persisted. Googled lots of Windows stuff, got very confused.
Read your post.
I found two versions of Logmein virtual ethernet adapter drivers in Device Manager, removed them both (with Hamachi still trying to run), then uninstalled Hamachi, then reinstalled, and problem went away. No idea why....
Many thanks.
* Only trouble is I can not find the virtual ethernet adapter drivers in Device Manager because I have no clue what I am looking for.
* I see nothing that says "Hamachi"
* I am using Windows 10 Home.
* I hope I gave enough info. If not let me know and I will try my best to get what we need to fix this.
* Thankls
Oldwolf out.