Was having network related issue, I thought hamachi was at fault, after uninstalling i sorted out problem (hamachi was innocent), re-installed hamachi and tried to re-join already existing network.
Now it says network is full and I cannot rejoin it, however I was a member of that network earlier. Is there anything i could do to get my old credential and rejoin network or do I have to wait for host to kick old account out of network and add new account?
Ever since the dreaded (for me) windows 10 update, my internet has been through hell, and now my friend cannot connect to my LAN game while my brother, a floor away, can. I tried everything from reinstalling to firewall adjustments and nothing works.
Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results:
Adapter configuration: OK
Traffic test: OK
Iv re-installed... alot, and with any combination i can find seeing how it's helped other people but still havent been able to fix this issue. Can i get some help or ideas to fix this?
Hello,
Me and a friend of mine are trying to use hamachi to play a game. Everything is fine on his side, but i'm having issues with hamachi being blocked by the windows firewall. I have confirmed this to be the result of the firewall, as disabling it fixes the issues and lets through inbound traffic. Here's the issue though: I have no idea how to allow hamachi through, everything i have tried has yielded nothing of value.
I am running windows 7 with Security Essentials as my anti virus.
So, in short, how do i allow inbound hamachi traffic?
Summary report ------------------------ Test name: Peer Result: [YELLOW] -> Problems found Details: Tunnel: OK Local results: Adapter configuration: OK Traffic test: Inbound traffic blocked, check firewall settings Peer results: [Censoring, just in case] Adapter configuration: OK Traffic test: OK ---------------------------------------------
Hello,
I am getting a peer authentication error with one client. In the details it states that the tunnel is blocked, and this is because the peer is using a different authentication method. Does anyone know how to resolve this? Both are trusted thus I am not sure why the mismatch occurred.
Thanks
Hello all, here is what I am trying to do....
I would like to have a PC running Hamachi Gateway that is using an Aircard for its Internet Access, and access a device that I will have direct connected back to the PC's ethernet port.
So, lets say that the Aircard has a real world IP of 160.x.x.x and the Ethernet side of the PC is statically set to 192.168.1.100.
My end device would have 192.168.1.200 assigned to it.
So ideally, I want to connect to the device at 192.168.1.200 somehow.
Is this possable with Hamachi Gateway? Or will the Gateway try to allow access to the 160.x.x.x network as opposed to the 192.168.1.x network?
Thanks!
Funciona si lo instalo en Windows 2000 server?
So i have looked trough all the possible solutions i could find, but none helped. Basically me and my friends decided to make a hamachi minecraft server again and since i have a spare computer we'll use that one for the server.
It all went well until i connected to the hamachi network, the connection between me and the server is a ''relayed tunnel'' instead of the ''direct tunnel''. I also noticed that i can ping the server, it's at 75-80ms for some reason and i cannot ping my main rig back on the server, the connection times out. Note that both PCs are on the same network and basically 2 meters away from eachother on the same router.
I tried many solutions, but none helped (firewall, reinstall etc.). Thanks in advance :)
EDIT: ok, disabling forewall lets me ping it, tho i still cannot connect to the minecraft server, still stuck on ''downloading terrain'', on the server PC i can connect to it with ease.
I reinstalled many times and I end it up with the same problem. After installing, the Hamachi network adapter goes missing in the Device Manager and also Hamachi doesn't show up in the Network Connections. I used this program before in Windows 8 and it worked then. I think Windows 10 just doesn't let me install Network Adapters. Also, I used the Advanced Startup to remove something with installing drivers but that didn't help with solving this. Please help.
I am using Hamachi on a mac.
The power button glows yellow, says connected, and everything else in the interface is white.
I have tried reinstalling after removing applciation support files, but it doesn't fix it.
I am on 10.8.5
hola
holache algien me juega un minecraf
So I have installed 3 different versions of hamachi 7 different times. Ever since I got my new router, Hamachi will NOT work for me and I'd like it to. It says "probing" or "reconnecting" and then asks if I want it to monitor server availability. The IP address is 0.0.0.0... Does anyone know what to do?
Hello everyone
After an update yesterday 03/05/16, this am I got "You'll need a new app to open this logmein"
Went to Windows Store and there's no app for LogMeIn. Is this a compatibility issue?
Please advise. Thank you
flooc
Our LAN consists of a single dedicated file "server" running Windows 8.1 Pro. We have various other Windows versions on the network, 7 Pro and above including 10 Pro. I'm the admin, and I set up a trial of Hamachi using the 8.1 server PC and my Windows 10 laptop. There didn't appear to be any problems getting everything working. Unfortunately, I've found that it only partially works.
First, I seem to only be able to get the two computers connected if I am actively logged into the server computer. I'm assuming this is because Hamachi doesn't run as a service when the computer starts, but rather as an application when someone logs in at the server console (or even via LogMeIn). If that's true, is there a way to start Hamachi and its functionality without having a user actively logged into the server PC?
Second, if I'm logged in (as Admin in my case) on the server and start Hamachi on my laptop, the computers appear to connect successfully. However, I can seem to only get access TO my laptop FROM the server - e.g. I can browse my laptop's shares from the server side, but I can't browse any shares on the server side which is really what I need to be able to do. For this to work, do I need to uninstall everything and re-install in the reverse direction, making my laptop (what I've thought of as the 'client') the server instead?
Any suggestions for making this Hamachi setup more useful would be greatly appreciated.
Diagnostic tool is returning this error:
File not found: hamachi.cat
File not found: hamachi.sys
File not found: hamdrv.cat
File not found: hamdrv.sys
However it is saying that my adapter is running correctly.
I have tried every suggestion possible to get those drivers installed.
The strange thing is that currently all those files are sitting in my Hamachi install folder, the diagnostic tool either cant seem to find them or there is some other issue.
Regards
Hi,
I installed the beta version of hamachi for Linux/Armhf on my Banana Pi.
By downloading the .dep file 'logmein-hamachi_2.1.0.139-1_armhf.deb'
and installed the file with sudo dpkg -i logmein-hamachi_2.1.0.139-1_armhf.deb as a prober root user.
Next while doing that the Banana pi did comlain a about missing depencencies wich I corrected by running
a 'sudo apt-get install --reinstall --fix-missing lsb lsb-core -y'
Once the hamachi was finally intalled it did try to boot however it will not start
@bananapi:~$ sudo dpkg -i logmein-hamachi_2.1.0.139-1_armhf.deb (Reading database ... 53470 files and directories currently installed.) Preparing to unpack logmein-hamachi_2.1.0.139-1_armhf.deb ... Stopping LogMeIn Hamachi VPN tunneling engine logmein-hamachihamachid: no process found * Removing any system startup links for /etc/init.d/logmein-hamachi ... /etc/rc0.d/K49logmein-hamachi /etc/rc1.d/K49logmein-hamachi /etc/rc2.d/S11logmein-hamachi /etc/rc3.d/S11logmein-hamachi /etc/rc4.d/S11logmein-hamachi /etc/rc5.d/S11logmein-hamachi /etc/rc6.d/K49logmein-hamachi Unpacking logmein-hamachi (2.1.0.139-1) over (2.1.0.139-1) ... Setting up logmein-hamachi (2.1.0.139-1) ... mknod: ‘/dev/net/tun’: File exists /etc/init.d/logmein-hamachi: $local_fs $network <_io.TextIOWrapper name='/var/lib/lsb/depends' mode='w' encoding='UTF-8'> Adding system startup for /etc/init.d/logmein-hamachi ... /etc/rc0.d/K49logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc1.d/K49logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc6.d/K49logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc2.d/S11logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc3.d/S11logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc4.d/S11logmein-hamachi -> ../init.d/logmein-hamachi /etc/rc5.d/S11logmein-hamachi -> ../init.d/logmein-hamachi Starting LogMeIn Hamachi VPN tunneling engine logmein-hamachi/sbin/start-stop-daemon: unable to start /opt/logmein-hamachi/bin/hamachid (No such file or directory) *
does please anybody know how to resolve this problem?
Thx, user 234
Hi All,
I have just started a hamachi minecraft server. The minecraft server is running linux. I pinged google.com from both the server and my computers, and they are about 30ms-40ms. However, the ping between the server and my computer through hamachi is quite high, about 200ms-300ms, sometimes even 500ms. Also, the server is registering the commands when I enter it in, however, the command doesn't register in the client until 2-3 mins later. This shows the sending commands is working, but receiving commands is lagging. Could you please help with this?
Also, if you can, please suggest the recommended network mode (mesh, hub-and-spoke, etc.) for my hamachi minecraft server. Thank you for your help!
From,
Ray