How do I find my port in Hamachi for lets say Unturned
I'm trying to run an unturned server with my friends but it wont work
↧
Hamachi Ports
↧
how to delete users
I have 5/5 user in network, I would like to delete 2 of them and add new one. How can I do that please.
Many thanks!
Dusan
↧
↧
Tunnels error nothing working
in my self diagnosis Everything is ok except tunnels. And before anyone tells me to do the usual things to fix it that I've already googled I'll tell you everything I've already done.
1- restarted the network.
2- checked for updates.
3- disconnected and reconnected the network under adapter settings
4- made sure my firewall allows it to receive and send information as well as access.
5- restarted my PC incase of an update
I've done everything I've found online in terms of googling the tunnels error.
for more specifics when I click details on the problems found it says everyone in my Hamachi server is offline except for me even though they are online in my server.
when I ping anyone on the server it times out and when they ping me it times out.
Please can someone help me this wasn't a problem like 2 weeks ago and I've been vigorously Searching the internet for a solution.
↧
VPN hamachi, ping local ip
Hello, I have installed hamachi on the 2 PCs distant from each other. The first pc is positioned in a corporate network that has local ip on a scale of 192.168.1.X, the second pc is inside a network with a scale of 192.168.5.X. The hamachi connection works well and the 2 PCs are connected, however when I 'ping' a PC located in the first 192.168.1.X network I cannot reach it. The vpn mi server to connect the 2 networks via two PCs with hamachi installed. How can I solve? What subscription do I need to subscribe?
↧
Logmein hamachi with MacBook m1 apple silicon no works.
Godo morning, I have a problem. Logmein hamachi no works with MacBooks with SoC arm. I have a MacBook Air m1, and overtimes I try to launch LogMeIn, it crashes. there will be a version for this MacBook whit m1?
thank you.
↧
↧
RaspberryPi 4 No lsb-core No internet connection.
Hi all,
I have a problem with the installation and configuration of hamachi on all raspberry models from Raspbian Buster 2020-02-13 (should be the first release made for Raspberry Pi4 B).
From this version I can't use Hamachi.
When I try to install lsb-core with "sudo apt-get install lsb lsb-core", it tell me that it is deprecated.
Despite this, I try to install hamachi with the version "logmein-hamachi_2.1.0.203-1_armhf.deb".
The installation seems to be fine, and I can configure the access to my account and hamachi tell me that is logged.
When I configure a Gateway Network (with Rpi as Gateway) and I reboot the system, the connection to internet (local network is connected) doesn't work and I can't reach the Raspberry from LogMenIn Central.
For now the only my solution is to use a RaspberryPi 3 B+ or lower with a 2019 release. Are there any solution to work with newer release and with Raspberry Pi 4 B?
↧
LogMeIn Connecting to Servers Failing!
Hi everyone,
I've been looking through countless threads on how to fix this. I've gone into regedit, services, uninstalled and re-installed, etc, etc.... and nothing is working. Here's my 2-engine log:
12/03 08:50:35.688 [12504] sys: connmgr_go_online, reconnect 0
12/03 08:50:35.694 [12504] ses: on_conn_state(connected, 0x0)
12/03 08:50:35.695 [12504] ses: select conn mode 'dns lb'
12/03 08:50:35.696 [12504] ses: go_offline, keep_tunnels 1, login_on_relaunch 0, actual state 4 ..
12/03 08:50:35.702 [12504] sys: go_online, reconnect 0
12/03 08:50:35.706 [12504] ses: resolving hamachi-data-center.logmein-gateway.com ..
12/03 08:50:35.707 [12504] dbg: enable(Hamachi), locked: 0
12/03 08:50:35.707 [12504] vpn: domain [Hamachi] -> 'VPN_opening'
12/03 08:50:35.708 [12504] vpn: enabling [Hamachi] domain ..
12/03 08:50:35.709 [12504] tap: win32_set_hw_tapdev(Hamachi) ..
12/03 08:50:35.710 [12504] tap: list_netdev_win32() ..
12/03 08:50:35.775 [12504] tap: job [Hamachi, JOB_set_tapdev, 1] start thread ..
12/03 08:50:35.776 [12504] ses: resolving hamachi-list.12.logmein-gateway.com ..
12/03 08:50:35.777 [14796] tap: job [Hamachi, JOB_set_tapdev, 1] thread started
12/03 08:50:35.778 [14796] tap: set_tapdev(Hamachi, up) ..
12/03 08:50:35.779 [14796] tap: list_netdev_win32() ..
12/03 08:50:35.798 [14796] tap: device found, status disabled, not running
12/03 08:50:35.799 [14796] vpn: enabling tap device ..
12/03 08:50:35.800 [14796] tap: do_status(ROOT\NET\0000, 1) ..
12/03 08:50:35.802 [14796] tap: SetupDiCallClassInstaller() ..
12/03 08:50:35.817 [14796] tap: do_status(), rc 1
12/03 08:50:35.835 [12504] ses: selected (216.219.115.8, 5690)
12/03 08:50:35.836 [12504] ses: selected 01 connection type
12/03 08:50:35.839 [12504] ses: resolving 216.219.115.8 ..
12/03 08:50:35.845 [12504] ses: connecting to 216.219.115.8:12975 ..
12/03 08:50:50.925 [14796] tap: device Hamachi did NOT make it to the list
12/03 08:50:50.926 [12504] tap: job [Hamachi, JOB_set_tapdev, 1] done, result: success
12/03 08:50:50.927 [12504] vpn: on_set_tapdev(Hamachi, 1) -> ok
12/03 08:50:50.928 [12504] tap: init(), devName [Hamachi]
12/03 08:50:50.929 [12504] tap: list_netdev_win32() ..
12/03 08:50:50.949 [12504] tap: set mtu
12/03 08:50:51.007 [12504] sys: run_command(netsh interface ipv4 set subinterface "Hamachi" mtu=1404 store=persistent), done with 1
12/03 08:50:51.008 [12504] tap: devName Hamachi
12/03 08:50:51.009 [12504] tap: fileName : \\.\HamachiTap.62A04331-0C81-4C06-AA96-5AA4824D5468
12/03 08:50:51.009 [12504] tap: mac : 7a:79:00:00:00:00
12/03 08:50:51.010 [12504] tap: queueSize : 0
12/03 08:50:51.011 [12504] tap: linkSpeed : 1410065408
12/03 08:50:51.012 [12504] tap: linkMtu : 1514
12/03 08:50:51.013 [12504] tap: linkState : 0
12/03 08:50:51.014 [12504] tap: vdhcp : 0
12/03 08:50:51.015 [12504] tap: vdhcp.srv : 0.0.0.0
12/03 08:50:51.016 [12504] tap: vdhcp.cli : 0.0.0.0 / 0.0.0.0
12/03 08:50:51.017 [12504] tap: vdhcp.sec : 0
12/03 08:50:51.018 [12504] vpn: domain [Hamachi] -> 'VPN_up'
12/03 08:50:51.019 [12504] dbg: setup_vpn_domain [Hamachi]
12/03 08:50:51.020 [12504] dbg: vpn_domain::config - [Hamachi]
12/03 08:50:51.021 [12504] vpn: domain [Hamachi] -> 'VPN_setting_up'
12/03 08:50:51.022 [12504] tap: config(0.0.0.0,0.0.0.0)
12/03 08:50:51.023 [12504] tap: GetAdapterIndexByGuid [{62A04331-0C81-4C06-AA96-5AA4824D5468}]
12/03 08:50:51.025 [12504] tap: adapter 00000011 [\DEVICE\TCPIP_{CA72B60C-AB60-4D33-ABBB-6D2F5FF4CCD8}]
12/03 08:50:51.026 [12504] tap: adapter 00000004 [\DEVICE\TCPIP_{273A5FF6-AAA5-4A8C-AB23-447D5BF221F3}]
12/03 08:50:51.027 [12504] tap: adapter 00000017 [\DEVICE\TCPIP_{EB8AFEDC-17F3-4517-A7EC-9A3B5990E2FE}]
12/03 08:50:51.028 [12504] tap: adapter 00000018 [\DEVICE\TCPIP_{FCE34A99-2050-466C-97EC-F84568552E85}]
12/03 08:50:51.029 [12504] tap: adapter 00000016 [\DEVICE\TCPIP_{E83AD1AD-AC31-48DD-88C3-DBB6AF7E9BFB}]
12/03 08:50:51.034 [12504] tap: adapter addr 0.0.0.0/0.0.0.0, dhcp yes, want 0.0.0.0/0.0.0.0, [::/0]
12/03 08:50:51.035 [12504] tap: GetAdapterIndexByGuid [{62A04331-0C81-4C06-AA96-5AA4824D5468}]
12/03 08:50:51.037 [12504] tap: adapter 00000011 [\DEVICE\TCPIP_{CA72B60C-AB60-4D33-ABBB-6D2F5FF4CCD8}]
12/03 08:50:51.038 [12504] tap: adapter 00000004 [\DEVICE\TCPIP_{273A5FF6-AAA5-4A8C-AB23-447D5BF221F3}]
12/03 08:50:51.039 [12504] tap: adapter 00000017 [\DEVICE\TCPIP_{EB8AFEDC-17F3-4517-A7EC-9A3B5990E2FE}]
12/03 08:50:51.040 [12504] tap: adapter 00000018 [\DEVICE\TCPIP_{FCE34A99-2050-466C-97EC-F84568552E85}]
12/03 08:50:51.041 [12504] tap: adapter 00000016 [\DEVICE\TCPIP_{E83AD1AD-AC31-48DD-88C3-DBB6AF7E9BFB}]
12/03 08:50:51.042 [12504] tap: enabling virtual dhcp server ..
12/03 08:50:51.042 [12504] tap: setDhcp(0, 0.0.0.1, 0.0.0.0/0.0.0.0) = 1, 183
12/03 08:50:51.043 [12504] vpn: tap config done, [ok]
12/03 08:50:51.044 [12504] vpn: domain [Hamachi] -> 'VPN_up'
12/03 08:50:56.850 [12504] ses: io error, hmm, -1
12/03 08:50:56.851 [12504] ses: error 3, retryable yes
12/03 08:50:56.852 [12504] ses: selected 02 connection type
12/03 08:50:56.856 [12504] ses: resolving 216.219.115.8 ..
12/03 08:50:56.863 [12504] ses: connecting to 216.219.115.8:443 (ssl) ..
12/03 08:50:56.864 [12504] openssl_pipe::openssl_pipe(): 00000277F8D04200
12/03 08:51:17.867 [12504] ses: io error, hmm, -1
12/03 08:51:17.868 [12504] ses: error 3, retryable yes
12/03 08:51:17.869 [12504] ses: selected 04 connection type
12/03 08:51:17.870 [12504] ses: proxy is not configured
12/03 08:51:17.871 [12504] ses: exhausted all connectivity options (07)
12/03 08:51:17.874 [12504] ses: go_offline, keep_tunnels 0, login_on_relaunch 0, actual state 1 ..
12/03 08:51:17.878 [12504] vpn: disable roaming domain [Hamachi]
12/03 08:51:17.879 [12504] dbg: setup_vpn_domain [Hamachi]
12/03 08:51:17.879 [12504] dbg: disable(Hamachi), locked: 0
12/03 08:51:17.880 [12504] vpn: disabling [Hamachi] domain ..
12/03 08:51:17.881 [12504] tap: tap close [2036]:[Hamachi]
12/03 08:51:17.882 [12504] tap: setDhcp(0, 0.0.0.0, 0.0.0.0/0.0.0.0) = 1, 183
12/03 08:51:17.883 [12504] vpn: domain [Hamachi] -> 'VPN_disabling'
12/03 08:51:17.884 [12504] tap: job [Hamachi, JOB_set_tapdev, 0] start thread ..
12/03 08:51:17.885 [12504] dbg: vpn_domain::config - [Hamachi]
12/03 08:51:17.886 [19656] tap: job [Hamachi, JOB_set_tapdev, 0] thread started
12/03 08:51:17.887 [19656] tap: set_tapdev(Hamachi, down) ..
12/03 08:51:17.888 [19656] tap: list_netdev_win32() ..
12/03 08:51:17.889 [12504] vpn: disable roaming domain [Null]
12/03 08:51:17.889 [12504] dbg: setup_vpn_domain [Null]
12/03 08:51:17.890 [12504] dbg: vpn_domain::config - [Null]
12/03 08:51:17.892 [12504] cfg: save()
12/03 08:51:17.896 [12504] cfg: hks: [0] [2048]
12/03 08:51:17.897 [12504] cfg: hkc: [0] [2048] [2048]
12/03 08:51:17.897 [12504] dbg: disable(Hamachi), locked: 0
12/03 08:51:17.898 [12504] vpn: disabling [Hamachi] domain ..
12/03 08:51:17.899 [12504] tap: job [Hamachi, JOB_set_tapdev, 0] queued
12/03 08:51:17.903 [12504] openssl_pipe::~openssl_pipe(): 00000277F8D04200
12/03 08:51:17.909 [19656] tap: device found, status enabled, not running
12/03 08:51:17.910 [19656] vpn: disabling tap device ..
12/03 08:51:17.911 [19656] tap: do_status(ROOT\NET\0000, 0) ..
12/03 08:51:18.915 [19656] tap: SetupDiCallClassInstaller() ..
12/03 08:51:18.918 [19656] tap: do_status(), rc 1
12/03 08:51:18.919 [12504] tap: job [Hamachi, JOB_set_tapdev, 0] done, result: success
12/03 08:51:18.920 [12504] vpn: on_set_tapdev(Hamachi, 0) -> ok
12/03 08:51:18.921 [12504] vpn: domain [Hamachi] -> 'VPN_disabled'
12/03 08:51:18.923 [12504] dbg: setup_vpn_domain [Hamachi]
12/03 08:51:18.924 [12504] dbg: vpn_domain::config - [Hamachi]
12/03 08:51:18.925 [12504] tap: job [Hamachi, JOB_set_tapdev, 0] start thread ..
12/03 08:51:18.926 [20348] tap: job [Hamachi, JOB_set_tapdev, 0] thread started
12/03 08:51:18.927 [20348] tap: set_tapdev(Hamachi, down) ..
12/03 08:51:18.928 [20348] tap: list_netdev_win32() ..
12/03 08:51:18.950 [20348] tap: device found, status disabled, not running
12/03 08:51:18.951 [20348] tap: already in a requested state
12/03 08:51:18.952 [12504] tap: job [Hamachi, JOB_set_tapdev, 0] done, result: success
12/03 08:51:18.953 [12504] vpn: on_set_tapdev(Hamachi, 0) -> ok
12/03 08:51:18.954 [12504] dbg: setup_vpn_domain [Hamachi]
12/03 08:51:18.955 [12504] dbg: vpn_domain::config - [Hamachi]
↧
FSX Accelaration pack and FSX Steam
Hi ,
I am running FSX Professional Edition plus Accelaration Pack. A friend is using FSX Steam.
Although we can connect via Hamachi ( works perfectly ), the Connection of the Flightsim is NOT working.
He cannot connect to my simulator.
I am wondering why ?
Any help would be very great !
thanks a lot
best greetings
Robert
↧
Setup Hamachi and my shares got messed up
I installed Hamachi today and now I can no longer access shared folders that are password protected.
I looked around and I can't find a solution to this.
I tried clearing all credentials (Run > control keymgr.dll), tried reboots as well, and I tried manually entering in the credentials.
I'm using 3 Windows 10 computers all uptodate and on the same release (build 20H2).
2 machines are on the same network and one is remote but I can't get a prompt for login credentials now (even after wiping them out. Before Hamachi, the two local computers could access the shares (password protected) and now they can't, just get a permissions denied.
The only way sharing works for me now is if I set the share permissions to "everyone", and while this temporarily works it is not a secure method for having an open share.
Any solutions?
↧
↧
Installation on Macintosh 10.15.7
Hi,
After I run the installer and launch the program I get the message that Hamachi Kernel extension blocked and to allow in security settings.
I can allow in Security and Privacy Files and Folders but Hamachi doesn't show up under Full Disk Access as it does on my other Macintosh.
I have unistalled and reinstalled and shut off virus protection programs
↧
Setting MAC client as existing networks new gateway?
I have an existing network called homenet. The original gateway computer has died and I replaced it. I have installed the new hamachi client with the link for the web interface. When I go under the web interface I have no way of selecting it as the gateway though. Any idea how to make this computer a gateway for this existing network?
↧
Is there a monthly virtual server subscription?
Hello .. i need a virtual server but i don't want yearly, can i get monthly virtual server?
↧
Problem
I downloaded hamachi, it is not displayed in the system. I cannot uninstall it and reinstall it. And when installing, I can not start it, it just closes.
↧
↧
Cant connect
Hi, so I wanna join a Minecraft server and my friend(the owner) is on blue if I right-click on him it says everything is ok. I tried restarting the router, disabling the firewall
↧
Regular disconnect with widows 10 update are available
We are running a desktop application through hamachi. The application disconnects regularly once available windows 10 updates. Once updated problem fixed. This is terrible. Please help
↧
Hamachi has no IPv4 and IPv6 connectivity.
This problem started on its own about a few days ago. I havent changed anything with my network adapters or installed any new software that would affect my network adapters. So far ive tried every fix that the logmein hamachi support has told me. Ive reinstalled (both hamachi and its adapter), ive deleted registry keys, disabled firewall, etc. Ive noticed though that everytime i turn the adapter on and try to connect it fails and then disables IPv4 and IPv6 in the network adapter properties in windows 10. Not sure what to do now.
↧
CentOS Hamachi Login not working / Relay mode
Did a fresh Hamachi setup on CentOS this morning according to the manual. However, the step "hamachi login" always results in a failure ("Logging in ..... failed").
I checked the following things:
- Connection from another computer in the same local network using the windows client. Works (in relay mode!). These two machines should go through exactly the same firewalls.
- Disabled Linux local firewalls (iptables, firewalld).
- Checked the h2-engine.log file. This contains some suspicious info:
12.08 11:09:00.213 ses: resolving hamachi-list.10.logmein-gateway.com .. 12.08 11:09:00.232 ses: selected (95.172.70.133, 6552) 12.08 11:09:00.233 ses: selected 01 connection type 12.08 11:09:00.258 ses: resolving 95.172.70.133 .. 12.08 11:09:00.309 ses: connecting to 95.172.70.133:12975 .. 12.08 11:11:07.594 ses: connection is established 12.08 11:11:07.634 ses: control connection is bound to 10.1.1.52
=> So the connection takes 2 minutes to establish? And then ...
12.08 11:11:07.634 ses: << msg_helo .. 12.08 11:11:07.658 ses: io error, send, 110 12.08 11:11:07.658 ses: error 3, retryable yes 12.08 11:11:07.683 ses: go_offline, keep_tunnels 0, login_on_relaunch 0, actual state 1 .. 12.08 11:11:07.708 ipc: 01cea800 del client
=> io error just after the connection has been established?
I assume a gateway/firewall problem (os specific?) Since I did not find any documentation on the h2-engine.cfg config file at all, is there a way to force the client into a relay mode (outbound udp connection instead of some inbound connection) directly? Inbound connections here are generally not so easy. And also firewall reconfiguration is not the preferred way.
Any ideas?
↧
↧
Error 1326 - Credentials Not Working
I am trying to set up Hamachi but when I try to sign in it gives me this error. I am logging in exactly as I would if I was sitting at the computer I am trying to remotely access. I also checked the computer I am trying to access to verify that I am in fact using the correct user name.
What is preventing me from connecting? How do I resolve this?
↧
Log in and off from a network
Hi all!
So my problem is that i need to log in and off multiple times from the same remote pc but after the first log off the Desktop that i try to log in to gets the Icon and the name in grey like they are offline.
I need my remote pc always on and always ready to get connected since it happens pretty often that i need information from that.
I feel that there is a solution to this but i really can't find it.
Thanks a lot!
↧
não foi possível iniciar a sessão nos servidores de autenticação estão desativados para manutenção
não consigo jogar minecraft com meus amigos pois da esse erro e não sei como resolver
↧